Kneeler

Prie Dieu | 24" x 33" x 21" | Single Kneeler | Wood & Fabric | 2724 | Ziegler | USA

Add this classic style prie dieu to your church or home for devotional prayer.  The single kneeler is beautifully designed, featuring crosses and cathedral style arches carved into the red oak wood with a European style edge.  A small shelf...

Prie Dieu | 24" x 33" x 21"| Single Kneeler | Wood & Fabric | 2624 | Ziegler | USA

Whether you are outfitting your church or setting up a devotional area in your home, this lovely prie dieu will fit in nicely.  The single kneeler measures twenty-four inches wide, thirty-three inches high and twenty-one inches deep...

Wedding Prie Dieu | 32" x 18" | Double Kneeler | Aluminum Frame | 2572 | Ziegler | USA

This wedding prie dieu will be a breeze to set up for the celebration of the sacrament of Holy Matrimony since it weighs a modest twenty-four pounds.  The double kneeler prie dieu is formed from aircraft grade aluminum and  features two...

Prie Dieu | 24" x 32" x 18" | Single Kneeler | Aluminum | 2552 | Ziegler | USA

Order this prie dieu from the F.C.Ziegler Company and easily move it as necessary to various locations in your church or chapel.  The single kneeler prie dieu is constructed from aircraft grade aluminum, weighing a modest sixteen pounds.  The...

Prie Dieu | 2 Sizes Available | Aluminum | Butternut Nylon | 110838 | USA

Order this prie dieu for your church and place it near the Blessed Sacrament, at the altar, or near the devotional candles.  It is made of lightweight, solid aluminum with a satin bronze finish.  The prie dieu measures thirty-one...

Prie Dieu | Wedding | 51"W x 20"D x 31"H | Aluminum | Vinyl | 1108177 | USA

Order this lovely Prie-Dieu for the celebration of the sacrament of Marriage in your church. The bride and groom will kneel in comfortable reverence, utilizing the padded kneeler and arm rest, which are covered in white vinyl...

Prie Dieu | 2 Sizes | Brass or Bronze | Velvet | Cross Embellishment | 401238 | USA

Invite the faithful to prayer with this beautiful prie dieu. Whether placed before a statue, near devotional candles, or at the altar during a wedding, it will surely serve a reverent purpose.  This prie dieu is available in cast bronze or brass and...

Bracket - Pivot Floor Mounted Type CE

Replacement Floor Mounted Pivot Bracket - Type CE Center Bracket w/Pivot 2" from Floor. Sold by the piece.

Kneeler Arm - Type P4 Pivot 3-1/2" From Floor (ATTYPEP4)

Kneeler Arm - Type P4 Pivot 3-1/2" From Floor. For Atwood-Hamlin Type Church Kneelers. Sold in "Pairs." "M", Shown in diagram, is the Kneeler "LEG" and is not included in any of the Kneeler "Arm" Pairs.

Rubber Bumper | Single Screw | For Wood Pews | RUH

Rubber Bumper with one Screw 5/8" Diameter, 3/8" Height. Replacement bumpers for wooden kneeler leg bottoms.

Mounting Stud - Type T

Mounting Stud - Type T For Atwood-Hamlin Type Church Kneelers.

Rubber Stop - Type R

Rubber Stop - Type R For Atwood Hamlin Type Church Kneelers.

Kneeler Arm - Type P5 Pivot 2" From Floor

Kneeler Arm - Type P5 Pivot 2" From Floor. For Atwood-Hamlin Type Church Kneelers. Sold in "Pairs."

Kneeler Arm - Type P3 Pivot 4-1/2" From Floor (ATTYPEP3)

Kneeler Arm - Type P3 Pivot 4-1/2" From Floor. For Atwood-Hamlin Type Church Kneelers. Sold in "Pairs." "M", Shown in diagram, is the Kneeler "LEG" and is not included in any of the Kneeler "Arm" Pairs.

Rubber Bumper - Double Screw

Double Rubber Bumper with two Screws 1/2" X 1 3/4" Replacement bumpers for wooden kneeler leg bottoms.

Rubber Foot - Type L

Rubber Foot - Type L For Atwood-Hamlin Type Church Kneelers. Inside Measurements = 5/8” x 1 7/8” Outside Measurements = 1 1/8” x 2 ½” x ½” Tall (These feet require a 2 part industrial strength epoxy to...

Bracket - Pivot Type J Angle Mount With Stops

Pivot Bracket - Type J Angle Mount Pivot Brqacket With Stops. For Atwood-Hamlin Type Church Kneelers. Sold in Right/Left Pairs

Bracket - ExtensionType H, Without Stop

6" Extension Brackets - Type H without Stops. For Atwood-Hamlin Church Kneelers. Sold in Pairs

Bracket - Extension Type G With Stop

Extension Bracket - Type G With Stops. For Atwood-Hamlin Type Church Kneelers. Sold in Right/Left Pairs.

Nylon Bushing - Type F

Nylon Bushing for Pivot Arm - Type F For Atwood-Hamlin Type Church Kneelers. Product Details: 1/4" collar Fits 3/8" #T Mounting Stud

Bracket - Screen Type E Without Stops

Screen Bracket - Type E Without Stops. V Shaped. Sold in Right/Left Pairs

Bracket - Combination Type DD - 3" Pin to Pin

Combination Bracket - Type DD 3" Pin to Pin. For Atwood-Hamlin Type Church Kneelers. Sold in "Pairs."

Bracket - Combination Type D - 4-1/4" Pin to Pin

Combination Bracket - Type D 4-1/4" Pin to Pin. For Atwood-Hamlin Type Church Kneelers. Sold in "Pairs."

Kneeler Leg New Style 5" Leg

When it’s time to replace the pads on your Atwood-Hamlin pew kneelers, it’s also wise to inspect and consider replacing the kneeler legs. Designed to work seamlessly with the New Style Atwood-Hamlin kneelers, these replacement legs maintain...